|
|
Electrodeposition of thin tantalum layers from ionic liquids and measurement of their electrical properties
Svobodová, Ivana ; Boušek, Jaroslav (referee) ; Šimůnková, Helena (advisor)
The thesis is focused on the electrodeposition of tantalum from ionic solution 1-butyl-1- methylpyrrolidinium bis(trifluoromethylsulfonyl) imide, ([BMP]Tf2N) at 200°C and description of related transfer and kinetic phenomena on the interface between the ionic solution and working electrode. Furthermore, the electrodeposition of tantalum layers in different ionic solutions containing tantalum salts and especially in ([BMP]Tf2N) is introduced. In the last part of the thesis, results of cyclic voltammetry, surface analysis SEM and elemental analysis EDX are discussed. MIS (metal-insulator-semiconductor) structure was determined comprising porous anodic alumina as the insulator and semiconductive TaxOy on the top of the insulator. The electric conductivity of the MIS structures was studied by using amper-volt IV and CV characteristics. The results of the cyclic voltametry, impedance spectroscopy and chronoamperometry are discussed.
|
|
|
Electrodeposition of thin layers TiO2
Jakubis, Ivan ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with issues of electrochromism and making active electrochromic film of titanium dioxide. By using various precursors consisting titanium element active film was electrodeposited on glass substrates covered with transparent conductive thin-film In2O3:Sn (ITO). Electrochromic characteristics of these substrates that were electrodeposited for different times and with different voltage have been studied. Than there has been studied the impact of various annealing temperatures on electrochromic characteristics.
|
|
|
The influence of alcaline accumulators loading on their parameters
Čech, Ondřej ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis deals with alkaline battery characteristics and it has special consideration of nickel-cadmium cells. There are three main experimental parts in this paper. First one is concerned with positive electrode materials properties and is aimed to investigate impact of magnesium ions formed into nickel hydroxide electrode structure. Second part deals with battery charging/discharging and response measurement tool design. National Instruments hardware PXI modules for data acquisition was used and program in LabView environment was made. Last one is concerned with nickel-cadmium cell properties changes during increased temperature stressing. Investigation of cell self-charge changes during lithium hydroxide addition into electrolyte was made.
|
|
|
Oxidation barriers prepared by electrochemical procedures
Šťastná, Eva ; Pouchlý, Václav (referee) ; Jan, Vít (advisor)
A process with aim to prepare an oxidically and thermal resistant layer was performed on the samples from clear aluminium (99,99+ %, VÚK čisté kovy, s. r. o.) and on the samples from clear titanium (99,95 % Goodfellow) with a layer from sputtered aluminium (99,99 %, VÚK čisté kovy, s. r. o.), An oxidic layer was prepared on the samples by anodization in the oxalic acid. The layer had fine, hexagonally organized pores with the diameter of 30 nm. During the following processing was the structure prepared for the electrochemical deposition of copper to the pores. The aim of the electrodeposition was preparation of copper nanowires deposited into the pores of the oxidic layer. The process was performed in the solution of copper sulfate and sulfuric acid in water. The controlling parameter of the deposition was voltage which had a very asymmetric period. The period had to be optimized for a successful preparation of the wires. The result of the whole process was structure with oxidic matrix whose most of the pores were filled with copper.
|
|
|
Utilization of fotovoltaic effect in combination with electrochromism
Šeda, Radek ; Kazda, Tomáš (referee) ; Jakubis, Ivan (advisor)
This thesis deals with the preparations of titanium and tungsten dioxide active electrochromic layers and simulation of link between electrochromic structures and photovoltaic cell. By means of electrodeposition, the active layers were made on the glass substrates ITO. These layers were subsequently analyzed, namely their intercalation properties. In this thesis, I tried to design the link between the electrochromic element and the photovoltaic cell. After this, functionality of this link was verified by software environment MATLAB Simulink.
|
|
|
Properties electrodes materials for alcaline accumulators
Řihák, Lukáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This thesis is involved in basical properties of electrode materials for alkaline accumulators. This thesis describes the possibilities of capacity stabilisation of nickel electrode to be stable for highest number of cycles. Thesis also consider modification of properties of electrode materials on the base of nickel hydroxide by using dopes (aluminum, manganese). Measuration proceeded on the thin film electrodes created by electrodeposition. Measuration of properties of electrodes proceeded by cyclic voltammetry and frequency analyzis.
|
|
|
Thin Film Electrodes for Electrochromic Devices
Macalík, Michal ; Kadlec, Jaromír (referee) ; Nováková,, Sabina (referee) ; Sedlaříková, Marie (advisor)
The work deals with the deposition of layers for electrochromic device with different methods. Transparent electrically conductive layer of SnO2 was deposited by pyrolytic decomposition of peroxostannate solution. Hydrogen peroxide in starting solution contributes to the oxidation process of growth layers and to increase the electrical conductivity. Active electrochromic layer of WO3 was electrolytic deposited from the peroxotungstic acid solution. Optimal deposition time and the optimal annealing temperature of deposited layers were found. Passive electrochromic layer of V2O5 was deposited using dip-coating method from peroxovanadate solution. A contribution of solution diluted with distilled water was investigated. Found results were used to construct complete electrochromic device with polymer gel electrolyte.
|
|
|
Fabrication of Nanowires into Porous Alumina by Electrolysis
Staňo, Michal ; Čechal, Jan (referee) ; Škoda, David (advisor)
This thesis deals with preparation of metal nanowires based on electrodeposition from aqua solution of metallic salts into porous dielectric aluminium oxide templates. The theoretical part covers various bottom-up methods of nanowire preparation using a template, electrochemistry and electrodeposition overview. The Experimental part is focused on the nanowire (Ag, Cu, Ni-H) preparation by means of direct current and alternating current electrodepositon and geometrical characterization of fabricated nanowires by scanning electron and atomic force microscopy. Defects of commercially available and prepared porous alumina templates are mentioned. Branching and coalescence of nanowires are briefly discussed as well.
|
|
|
Influence of Al ionts in nickel hydroxide on behaviour of electrodes
Růžička, Tomáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis is concerned with the influence of aluminate ions added in various concentrations into the structure of nicel hydroxide that creates Ni-Cd accumulators positive electrode active mass basis nowadays. Nicel hydroxide occurs in two basic modifications ? and ß. Nowadays used ß modification reaches low capacity in comparison with ? modification. The disadvantage of ? modification is its instability and gradual degradation to ß modification. The aim of this diploma paper is to select the optimal amount of aluminate additives into the structure of nicel hydroxide with regard to electrochemical efficiency, stability, and degradation degree of the accumulated layer.
|
|
|
Study of manganeese oxides properties by the EQCM method
Pléha, David ; Špičák, Petr (referee) ; Novák, Vítězslav (advisor)
The present work deals with the use of manganese oxide as a catalyst for positive electrode of fuel cells. The theoretical part is to analyze the problem of fuel cells, focusing on lowtemperature fuel cells. Are discussed and the methods of measurement and evaluation of properties of manganese oxide layer. The practical part deals with doping electrolytic manganese dioxide salts of divalent metals and monitoring their behavior in the cyclic voltammetry by the EQCM method.
|
guest ::
